CDL-A Company Driver - 2yrs EXP Required - OTR - Reefer - $1.4k - $1.8k per week - Shrock Trucking

Class A CDL Truck Driver - OTR | Wichita, KS $0.59 CPM | 2,500-3,000 Miles Weekly | Home Every Friday Now hiring a dedicated Truck Driver based out of Wichita, KS for a consistent OTR route. This Truck Driver position runs from Wichita to Denver, CO, then Garland, TX, before returning home weekly. What We Offer • $0.59 per mile • 2,500-3,000 miles per week • Home every Friday • Start trip Sunday night • No-touch freight • Drop & hook freight • Dry van work • Consistent lanes and miles Truck Driver Duties • Run a dedicated route: Wichita, KS ? Denver, CO ? Garland, TX • Safely transport dry van freight • Complete required inspections and paperwork • Maintain DOT compliance Truck Driver Requirements • Valid Class A CDL • Minimum 12 months of verifiable Class A driving experience • Clean MVR • Current DOT Medical Card • Dependable and safety-focused Truck Driver If you're an experienced Truck Driver looking for steady miles, weekly home time, and no-touch freight, apply today. This Truck Driver opportunity is ideal for a professional Truck Driver seeking consistent work and reliable pay. Join our team as a Truck Driver and enjoy a dedicated route designed for a successful Truck Driver career. #pdkcHTF Pay Range: - , General Benefits:

Electrical Design Engineer - Analog/Mixed

MID-CONTINENT INSTRUMENTS AND AVIONICS · Wichita, KS

COME JOIN MID-CONTINENT! “Where your work is valued—above-market pay, real work-life balance, and a team that feels like home.” THE POSITION… As an Electrical Design Engineer, you will design avionics, power electronics and battery systems interfacing within high-performance and safety-critical systems. Experience the entire product lifecycle, from concept and requirements, through design, implementation, testing and certification, and field application. You can expect a variety of opportunities ranging from products for cockpit displays and instruments, local and remote sensing, data conversion and storage, lithium battery management, along with providing analog/digital support to the power design team for AC/DC, DC/DC, and DC/AC power conversion. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Our employees serve the best customers from all over the world in general, business and commercial, advanced air mobility, defense and special missions markets. In this role, you'll be an important part of the reason our customers consider us a premier instrument, avionics, and aircraft power solutions provider. THIS POSITION MAY BE FOR YOU IF… • You have a bachelor's degree in electrical engineering. • You have a minimum of 5 years in analog and mixed-signal design, particularly suited to precision instrumentation, signal conditioning, and integrated circuit applications. • You have proficiency with design and simulation tools (PADS, LTSpice, or similar schematic capture). • You have a strong grasp of mixed-signal simulation techniques and PCB layout software. • You have a solid understanding of signal integrity, impedance matching, and EMI/EMC design practices such as RTCA DO-160 or MIL-STD-810/461. • You are proficient with Microsoft Office. • You have strong attention to detail. • You are organized, focused and results oriented. • You are a problem-solver with critical thinking and prioritizing skills. • You have excellent verbal, written and interpersonal communication skills. WE WOULD REALLY LIKE IT IF… (but it's not a deal breaker) • You have experience with Design for Manufacture and Design for Test (DFM & DFT) • You have design experience in the aviation industry WHAT YOU CAN EXPECT FROM ONE DAY TO THE NEXT… • Design and implement analog front-end circuits, including amplifiers, ADC/DAC interfaces, and filtering stages to enable accurate signal processing for a range of instrumentation • Lead mixed-signal system integration to design and verify reliable data conversion, filtering, and conditioning stages. • Research new components, technologies, and methods to incorporate into new and existing designs • Coordinate with other functional teams, including layout, mechanical, software, and certification engineers • Build and troubleshoot hardware, including soldering, operation of test equipment, and daily work in both office and test lab environments • Participate in rigorous testing and troubleshooting using tools like oscilloscopes, spectrum analyzers, and logic analyzers to validate performance against stringent requirements • Design and integrate manufacturing tools for new products, as needed • Create detailed documentation for design verification, testing protocols, and component selection rationales in required formats, including BOMs, ECOs, and work instructions WE ARE ONE OF THE BEST PLACES TO WORK… • We provide above-market pay and a comprehensive benefits package. • We promote an environment where you can excel in your career while still maintaining a healthy work-life balance. • Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment. • We believe anything worth doing is worth doing right – every time. • We have frequent events to keep work interesting. Our food drive is super impressive, we enjoy an annual food truck fest appreciation day, monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with incentives, and frequent ticket raffles for local sporting and cultural events. • We have a small company feel – even though we're doing big things! WHO WE ARE… Founded in 1964, Mid-Continent Instruments and Avionics provides superior instruments, avionics and power solutions to the global aerospace community. We operate one of the largest maintenance, overhaul and exchange programs in the world, and deliver safe and certified products, using innovative technologies and sophisticated clean sheet designs. This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Actual compensation offered within the targeted salary range will be determined by factors such as job-related knowledge, skills, and experience. Compensation details: 90000-130000 Yearly Salary PI5e80ab27d564-31181-40658697

Description:General Summary: The Restaurant Manager Supports the General manager by providing direction and support to hourly employees within franchised or corporate establishments by either performing or supervising the following duties throughout a standard 50 to 55 hour workweek. Position reports to the General Manager and requires minimal supervision. Essential Duties & Responsibilities: • Knowledgeable in current Company policies, practices and industry standards as they pertain to the organization and their impact on the organization as a whole. • Responsible for training, monitoring and implementing operational standards to ensure that employees are adequately trained and customer satisfaction is guaranteed. • Assists the General Manager in recruitment, selection, promotion, employee relations and scheduling relating to individual performance and business needs. • Coordinates the preparation, cooking and packaging of food orders as needed. • Monitors food cost and quality controls by reducing waste through the correct use of purchasing, receiving, storage, preparation, food labeling and rotation procedures. • Records and analyzes cash flow, movement of inventory, labor costs and cost of sales on a daily basis. • Observes all state and federal regulations as required by law to ensure the health and well being of employees and/or guests. • Administer Progressive Discipline Policy according to guidelines. • Lead by demonstrating a willingness to assume any responsibility or perform any task (“shift to assist”) regardless of nature to demonstrate that teamwork is part of the operating culture. All other duties as assigned. Requirements:Required Knowledge, Skills, & Abilities: • Minimum two years previous management experience in a full service establishment based on management's discretion. • Knowledgeable in both back-of-house and front-of-house operations. • Capable of making clear concise oral and written communication to all levels of employees. • Proficient use of all restaurant equipment including but not limited to such tools as: calculators, cash registers, computers, ovens, smokers, knives, etc. Education & Experience: High School diploma or equivalency as determined by management. Certifications/Licenses: Food Service Manager Certificate and completion of M.I.T. Program. Physical & Mental Requirements: • Position requires the employee to perform most of the work from a standing position for a total of ten to eleven hours each day frequently walking, pushing, pulling, lifting, cutting, carrying, kneeling, or stooping. • Work will involve frequent periods of lifting up to 30 pounds with occasional lifting to exert up to 80 pounds. Working Conditions: Position is in a climate-controlled establishment. Employees will be exposed to temperature extremes of heat or cold in conjunction with internal conditions as warranted for the preservation or preparation of food handling. Compensation details: 48000-60000 Yearly Salary PI0da51e6844db-31181-41570707

Hair Stylist - One Kellogg Place

Great Clips · Wichita, KS

Join a locally owned Great Clips® salon team and enjoy a rewarding career doing what you love! Whether you're an experienced stylist or a recent graduate, we're excited to meet you. Stylists Wanted for Multi-Location Salons: As the #1 growing salon brand, we are currently seeking dedicated full-time and part-time stylists to join our locally owned salons. We believe that confidence comes from knowledge. That's why our education program is second to none—ensuring you remain the expert behind the chair while maximizing your earning potential. Why us? • Top-Tier Education: We build your confidence & expertise. • Real Benefits: Perks that actually make a difference. • Big Earnings: It's time you made GREAT money! Apply today!! Why you'll love it hereGreat Clips salons give you everything you need to succeed: • Great, reliable hourly wage plus tips • Flexible scheduling with dependable retail hours • Job stability and a steady flow of customers driven by the marketing of the largest hair salon brand in the world — no self-marketing to find clients, booth rent or hidden fees, and no appointments required • Skill training, one-on-one technical coaching, and ongoing development through Great Clips University (GCU) • Exclusive discounts on professional salon tools and products • Potential for promotions to management, career growth and development opportunities, and recognition for great performance • Innovative salon technology — like Online Check-In and the Great Clips App — that helps take care of the busy work so you can focus on what you love most: delivering great haircuts • A team environment where stylists help each other succeed • Consistent income you can count on — without upselling pressure, commission stress or competition for walk-ins Employee offerings like medical benefits and paid time off (PTO) may be available at certain locations. What you bring to the teamTo join the Great Clips salon team as a stylist or barber, you'll need: • A valid Cosmetology or Barber License (requirements vary by state/province) • A passion for haircutting and helping customers look and feel their best • A desire to listen and make a difference through excellent customer service and genuine connections • A team-oriented attitude and desire to contribute to a great team culture Who we areAs the world's largest salon brand, with over 4,400 locally owned and operated salons across the U.S. and Canada, Great Clips combines strong brand recognition, marketing, and support with a close-knit, team-oriented culture. We're passionate about cutting hair and providing great value for the whole family. Talented teams of skilled professionals, along with convenient hours and a great haircut experience, set us apart in our communities. FAQ • Q: How do I apply for this job? A: It's easy to apply. Submit your application online, and a salon owner of your local Great Clips salon will review it and follow up with next steps. Each salon is independently owned, so timelines may vary. • Q: Do I need a license to work at Great Clips? A: Yes. You'll need a valid Cosmetology or Barber License. Licensing requirements vary by state or province. • Q: Do I need to bring my own clientele? A: No. Great Clips salons provide a steady flow of customers, so you can focus on doing great hair without self-marketing or building a client list. • Q: Do Great Clips salons offer color services? A: No, Great Clips salons focus on haircutting. This allows stylists to work efficiently, build strong technical skills, and enjoy consistent, predictable days. All Great Clips® salons are independently owned and operated by third-party franchisees. Franchisees, not Great Clips, Inc., are responsible for all hiring and personnel matters at their individual salons.