Foreperson 442
Asplundh · Danville, VA
Job description(tap to read)
Foreperson-442 This position ensures the safe productivity of his/her crew. Engages all employees on required training. Operates and maintains equipment. Communicates directly with his/her General Foreperson. Are you a real go-getter looking for an amazing opportunity with a nationwide full-service-utility contractor offering competitive wages and incredible benefits? Keep reading because this job might be for you! Job Type: Full-Time +, Non-Exempt Pay: Competitive, Hourly, based on experience Benefits: • Company Sponsored Retirement Plan • Health Insurance (Medical/Dental/Vision) • Employee Assistance Program • Life, long-term/short-term disability insurance Essential Functions & Responsibilities: • Trims and/or removes trees by climbing with the aid of a ladder, safety belt, climbing line, powered trimmer lift truck, or works from the ground using gasoline, air, and hand-powered saws, pruner, etc. He/she cuts branches or trunk sections and drops or lowers them to the ground with lines. • Uses wedges, sledges, and chain saws in felling trees or trimmed trunks and in cutting and splitting logs into manageable pieces. • Loads and unloads trucks. • Use hand tools, such as axes, handlines, saws, block and tackle, pruners, etc. • Feed brush and debris into woodchipper. • Repairs minor job-related damage to lawns, fences, and walkways. Services gasoline, air, hand-powered tools, and other equipment. • Operates and services equipment, such as gasoline, hydraulic tools, power saws, power winches, buckets, chippers, and sprayers. Operate a bucket near energized lines to remove branches and tree material. • Plans, coordinates, and assigns daily work for crew after receiving/interpreting orders from a General Foreperson/Line Clearance Supervisor. • Conducts field training/retraining, instructing crew on new or revised job units. • Enforces safe work practices, as experience, judgment, company policy, and OSHA specifies and conducts safety training in accordance with company policies and procedures. • Discusses with property owner/customer(s) issues such as obtaining access, power interruption, work to be done; refers controversial cases to the General Foreperson. • Obtains oral or written permission from property owners to perform required work. • Promotes and maintains good customer and public relations through effective completion of assigned work and the appropriate behavior of employees on the crew. • May be delegated the authority to investigate incident reports, damage claims, etc., and to settle minor damage claims. • Maintains accurate records, timesheets and reports related to the performance of the crew operation. • Furnishes General Foreperson and utility representative with reports of orders completed, units of work completed, crew time, minor damage repairs and distribution, etc. • Periodically furnishes reports on incidents, truck breakdowns, private property damage, new employee follow –up, etc. • Cooperates with customers, police, and fire departments when blocking streets or driveways. • Safeguards employees and the public from hazards in and around the work area. • Perform tree and bucket rescue. • Sets up barriers, warning signs, flags, markers, etc., to protect employees and safeguard the public from hazards. In emergency situations, determines action to be taken to eliminate hazards to life and property. • Inspects and makes or provides necessary repairs to tools, trucks, and other equipment. • Maintains good housekeeping on truck and at work location. • Responsible for DOT maintenance and inspection requirements on all required vehicles. • Keeps informed regarding new equipment, specifications, standard practices, operating procedures, and customer and company employee relations policies and practices, including EEO and AA policies. Requests repair or replacement, when necessary. • Performs other related work as assigned by superiors. Minimum Qualifications: • Requires the understanding of drawings and symbols representing lines, voltages, line equipment, etc. • Have the knowledge to identify tree and shrub species. • Must be able to walk, climb, and work from ladders, or at various heights, on uneven and slippery surfaces, performing mentally/physically demanding work under unfavorable weather conditions while handling equipment or material. • Must have excellent communication and leadership skills. • Must have organizational skills and be able to multi-task. • Must be capable of adjusting to field requirements and take independent action without close supervision. • Must be able to safely drive an approved company vehicle. • Must be able to work with hands above head for extended periods of time. • Due to the capacity of existing equipment, the weight of the employee should not exceed approximately 300 pounds. • Must have no fear of heights. • Willing and able to work long hours and overtime during emergencies, including holidays and weekends. Education & Experience: • Must be 18 years or older. • High School Diploma or GED equivalent preferred. • 1+ year of related industry experience required. Pre-Screen: • Upon offer, employees may be required to subject and pass a pre-employment drug screen, background and/or MVR check. License & Certifications: • Valid Driver's License required. • Obtain Commercial Driver's License within 90 days of hire. • Ability to obtain Herbicide license when required. Travel Requirements: • Ability to report and/or travel for storm emergencies. Physical Requirements: • RARE (less than 10%): Sitting, Kneeling, Crawling, Color Vision, Climbing Stairs • OCCASIONAL (up to 33%): Stooping, Squatting, Climbing On/Off Truck, Climbing Ladders, Pushing, Reading, • FREQUENT (up to 66%): Carrying, Pulling, lifting up to 50 lbs., Balancing, body-twisting, Hearing/Speech Range, Lifting, lifting up to 10 lbs., Manual Dexterity, Speaking Clearly, Walking • CONTINUOUS (up to 100%): Standing, Sense of Touch, Gripping, Seeing Distant, Reaching, range-of-motion, Depth Perception, lifting over 10 lbs. to 50 lbs., Climbing Poles, Sense of Touch Safety: Due to the inherently dangerous nature of the industry and requirements to work with or around hazardous equipment, employees must have sufficient eyesight to judge distance/coordination of equipment and tools, be able to maintain attention and concentration for extended periods of time, be able to withstand exposure to all kinds of weather while completing work assignments, be able to wear personal protective equipment as necessary, be able to enter and exit a vehicle numerous times a day, have the endurance necessary to traverse various terrain, be capable of performing job duties throughout a standard 8- or 10-hour day, be able to communicate with others, read, write, and comprehend written/verbal job instructions and information, and communicate and handle conflict professionally. • Works in proximity to energized power lines. • Works around excessive noise from machines, chain saw, woodchipper and other equipment with hearing protection. • Works in all temperatures and weather and will be exposed to nature, i.e., irritating plants and biting or stinging insects, dust, etc. • Works at varying heights above ground and on unlevel terrain. • Must be able to walk, climb, and work from ladders, or at various heights, on uneven and slippery surfaces, performing mentally/physically demanding work under unfavorable weather conditions while handling equipment or material. Individuals with a disability who desire a reasonable accommodation can contact the ADA Coordinator by calling 1-833-222-3066. We partner with the Department of Homeland Security/U.S. Customs and Immigration Service to e-Verify all newly hired employees. An Equal Opportunity
Design Production Coordinator (Remote)
Shepard · Danville, VA
2 days ago Be among the first 25 applicants Get AI-powered advice on this job and more exclusive features. The Design Production Coordinator works closely with the Graphic Designers, Production Managers, and Account Executives to oversee the timely management of creating and processing graphic production files. This position will need to export large-format print-ready graphics for print production for trade shows and special events. The Design Production Coordinator will also coordinate with Account Executives to ensure the timely approval of graphic orders based on the event production schedule. Key Contributions of the Role • Follow design layout instructions, pay attention to detail, proofread, and work independently • Provide quality control and maintain compliance with company structural and graphic standards • Work with team members to ensure work is in alignment with client needs • Must understand the oversize print production process to ensure design integrity, color accuracy, and image quality are met • Good typography skills; understanding of layout and design • Work with and understand various file types, such as Vector, PDF, and Raster to prepare files for Print Production team members using digital printers • Nights and weekends may be required to accommodate show schedules and seasonal workload Requirements • Bachelor's Degree in Graphic Production, Graphic Design, Visual Communications, (or similar) or 2-3 years (minimum) of experience in oversize print production graphics or trade show graphics • Required experience with the following 2D software programs: • Adobe Creative Cloud (Acrobat, Illustrator, InDesign, Photoshop) • Microsoft Office (Word, Excel, Outlook, Teams) and WebEx • Windows-based design environment • Excellent communication skills (written and verbal) and ability to work well with groups • Ability to work well under pressure and demand • Ability to adjust designs based on constructive feedback and/or customer request • Possess a can-do attitude and positive nature towards projects and teamwork Aligning With Our Values for Success • Demonstrate Core Values of Caring, Commitment, Integrity, Spirit, Responsiveness, Inclusivity, and Teamwork • Ability to perform as a responsible ESOP owner by making daily decisions to benefit the client and the company • Treat all internal and external customers with courtesy and respect, as outlined in our Blue Diamond Customer Service Program Please note that the roles and responsibilities outlined in this job description are not exhaustive and may be subject to change. Additional tasks may be assigned as needed to meet the evolving needs of the company. Shepard is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, age, color, sex, gender identity, sexual orientation, non-disqualifying physical or mental disability, veteran status, or other non-merit factor. All employment decisions are made based on business needs, job requirements, individual qualifications, and merit. Seniority level • Seniority level Associate Employment type • Employment type Full-time Job function • Job function Design • Industries IT Services and IT Consulting Referrals increase your chances of interviewing at Shepard by 2x Get notified about new Design Coordinator jobs in Las Vegas, NV. Las Vegas, NV $57,600.00-$72,000.00 22 hours ago Vibee - Seasonal Part-Time Ticketing Project Coordinator Las Vegas, NV $42,000.00-$45,000.00 1 week ago Insomniac - Senior Apparel Graphic & Accessories Designer Henderson, NV $75,000.00-$90,000.00 6 days ago Vibee - Seasonal Part-Time Ticketing Project Coordinator We're unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI. #J-18808-Ljbffr
Deputy- Sheriff's Office
City of Danville, VA · Danville, VA
Description Perform routine protective service and responsible human support work in the City Jail and the annex; does related work as required. Performs routine duties and responsibilities when required. Performs routine duties and responsibilities when assigned to specialized units. This job involves working 12 hour rotating shifts as required. Work is performed under the regular supervision of a shift supervisor. Position involves a variety of public safety duties in the Sheriff's Office. Processes the inmates into the penal institution taking charge of personal effects and advising them of institutional rules and regulations. Attends to the personal needs and activities of the prisoners according to institutional needs and requirements; Conducts periodic security checksof the inmates as well as the institution grounds; Escorts and transports inmates to judicial proceedings and other institutions; Prepares records and reports of daily activity; Reports to work on assigned duty schedule; Performs other reasonable duties as assigned. General knowledge of laws, rules and regulations relating to courts and criminal justice; skill in the use of firearms, public safety equipment and motor vehicles; ability to understand and carry out oral and written instructions and to prepare clear comprehensive reports; ability to deal courteously, firmly and tactfully with the public; ability to analyze situations and to adopt quick, effective and reasonable courses of action. General knowledge of the practice of modern penology as related to the supervision and care of person under institutionalized restraint; ability to maintain good working relationships with coworkers and with the public. Any combination of education and experience equivalent to graduation from high school. Possession of a driver's license valid in the Commonwealth of Virginia. Must meet and maintain all Office and State Training and education requirements for position. Please note: This is not a City of Danville position. Applications are forwarded to the Danville Sheriff's Department.
Defense Mission Lead
Armaments Research Company · Danville, VA
Defense Mission Lead Virginia, United States About Armaments Research Company Armaments Research Company (ARC) is a technology company dedicated to bringing real-time situational awareness and battlefield logistics capabilities to the warfighter. You will be an integralpart of the ARC team managing program execution in support of our innovative and powerful IoT devices to enhance national security. Our core offering is the ARC AI-Enabled Weapons Sensor (AEWS), which collects and transmits real-time tactical data to the cloud. This information enables battlefield/tactical awareness and aggregated insights into big data sets that do not exist today. ARC technologies were initially developed in partnership with DARPA and the National Science Foundation and leverage internet-of-things (IoT) technology and machine learning to derive actionable insights and transform operational responses. This novel technology will be deployed at scale to enhance safety, decision-making, and sustainment for the warfighter at the tactical edge. What You'll Do The Defense Mission Lead plays a critical role at the intersection of customer engagement, program delivery, and technical integration. You will act as the face of ARC for key defense customers and ensure successful deployment and sustained operational effectiveness of ARC technologies in the field. This role blends program management, onsite technical oversight, and strategic growth, requiring a unique mix of mission focus, communication skills, and operational acumen. Role Responsibilities - How You Will Make an Impact • Serve as the primary point of contact for designated defense customers, managing the full lifecycle of deployments—from planning through sustainment—to ensure alignment with customer priorities, contractual requirements, and company strategic goals • Own and drive program timelines, risk mitigation strategies, and customer reporting requirements in coordination with internal cross-functional teams • Support contract execution, including milestone tracking, deliverables management, and compliance with program requirements • Lead onsite integration of ARC systems, collaborating with engineering and support teams to ensure successful technical performance • Represent ARC at field exercises, testing events, and technical integration forums • Translate customer feedback and operational needs into actionable insights for product and engineering teams to inform the product roadmap and feature development • Identify and cultivate opportunities for follow-on sales, use-case expansions, and broader adoption of ARC technologies • Build and maintain trusted relationships with end users, acquisition officers, and unit-level leadership to ensure mission alignment and long-term success Relevant Skills and Experience • Bachelor's degree required; advanced degree preferred • 5+ years of experience in defense operations, technical program management, or military-focused customer success • Prior service in the U.S. military or direct support to DoD customers strongly preferred • Proven experience managing complex deployments or fielding of technical systems in a defense environment • An understanding of defense acquisitions and ability to grow existing business and revenue streams adjacent to existing deployments • Experience interfacing with engineers and technical staff to understand and relay technical issues in real time • Exceptional communication and stakeholder management skills, with a bias for action and ownership • Willingness to travel regularly to customer sites, including austere or field-based locations • Active security clearance or ability to obtain one This position will require access to restricted information and facilities protected under U.S. laws and regulations, including the National Industrial Security Program Operating Manual (NISPOM). Please note that any offer for employment will be conditioned on any required authorization to receive access to such restricted information and facilities necessary to perform the responsibilities of the position. Citizenship Verification: This position requires verification of U.S. Citizenship to meet federal government security screening requirements required for this role. The successful candidate must be a U.S. Citizen and otherwise eligible to obtain access to classified information and facilities necessary to perform the responsibilities of the position. What We Offer: Equity Options 401k plan Employer paid employee medical, dental and vision 12 paid holidays plus Flexible PTO Policy
Job Description We are seeking a commercial or industrial Electrician who has a desire to learn and grow in the field of HVAC Controls and Building Automation Systems (BAS) to join our federal team supporting the Pentagon in Arlington, VA. We've supported the Pentagon for nearly 20 years with their energy efficiency and sustainability needs, primarily working with the HVAC Controls and Building Automation Systems (BAS). At Johnson Controls, we support our nation's most critical facilities, the people who occupy them, and the missions they enable. Johnson Controls Federal Systems (JCFS) is a specialized team serving as a trusted partner to the federal government. We help modernize U.S. military installations, Department of Defense and other federal agency facilities to be smarter, more resilient, efficient, sustainable, and secure. Pay range: $45.00 - $55.00 per hour to start with designated milestone pay increases for completed training. Negotiable based on experience. Company Vehicle: Yes, plus gas card Shift: Day shift, primarily 6:30am-3:00pm, Monday-Friday Benefits: Eligible for on first day of employment Vacation: 3 weeks of paid vacation, 5 sick days, 3 floating holidays, and 10 standard holidays per calendar year Travel: Limited. Primary work will all be at the Pentagon. May travel some initially for training. As a Controls Electrician, you will: • Perform preventive maintenance, repair, installation, commissioning, point-to-point checkouts, troubleshooting and/or replacement of HVAC controls systems (BAS systems) and related light commercial mechanical equipment (VAV's, VRF's, AHU's, etc); most work will involve Johnson Controls Metasys and Distech controls • Conduct self-study and instructor led training to improve technical proficiency in company's product lines and systems; completes certifications as required • Diagnose and repair a variety of electronic and digital control system malfunctions • Test and perform modifications to systems software when needed • Assist with sketching and documenting field changes and discrepancies for engineering corrections and drawings • Provide training and associated manuals and documentation to customers on electronic control systems operations • Help mechanical staff troubleshoot issues and may help with minor mechanical maintenance • Ensure work performed complies with company, federal regulations, industry standards and guidelines, and customer requirements • Compile project documentation, such as certificate of completion, customer training forms, training certificates and punch lists • Read and properly interpret blueprints, diagrams, submittals, specifications, software/systems programs, schematics and operational product manuals • Adhere to Johnson Controls and customer safety standards, provide safety awareness leadership and instruction to technicians and subcontractors on Johnson Controls work sites Required Qualifications: • Experience working with commercial or industrial electrical systems, preferably with controls or building technologies and systems (HVAC controls, Fire, Security, Utilities, etc). • Strong personal computer skills with proficiency with Microsoft Office products (Word, Excel, Powerpoint, etc) • U.S. citizen with the ability to obtain and maintain required government security clearances and/or badges as required to perform site duties. (This involves a background/character, criminal history, employment, and credit check.) Preferred Experience: • Knowledge of electronic or digital controls systems, HVAC controls systems, facilities management systems, site preparation, peripheral equipment installation and servicing techniques • Experience working with HVAC mechanical equipment; VAV's, VRF's, or other related systems and equipment • Technical knowledge and experience working with Johnson Controls Metasys, Tridium Niagara, or Distech Direct Digital Control (DDC) system • Programming and/or troubleshooting various brands of HVAC controls products is highly desired (Johnson Controls, Honeywell, Siemens, Delta, Distech, Carrier, ALC, Andover) • Experience with BAS communication protocols including at least one of the following: BACnet MSTP, BACnet IP, N2, P1, Modbus, and/or LON • Experience using SMP, SCT, and/or CCT Preferred Education: • Technical schooling in Electrical or Mechanical • Journeyman or Master Electrician license • Associates Degree or Bachelor's Degree in Engineering, Computer Science, Electronics, or a related field Who We Are At Johnson Controls (NYSE:JCI), we are One Team working collaboratively to create purposeful solutions that make a difference in the world. We are a Fortune 500 company with more than 100,000 employees worldwide offering the world`s largest portfolio of building technology products, solutions and services. As a member of our Federal Systems team, your work matters. We value and recognize your contributions and want to help you succeed. We invest in our employees, provide opportunities for growth and advancement, and foster a culture of inclusion and respect. To learn more about who we are and what we do, please check out our video. Recently, Johnson Controls has been recognized by several organizations for leadership in Environment, Sustainability and Governance, as well as innovations in smart building platforms: • Named to • Corporate Knights Global • Named to Forbes list • CDP 2023 ' • Ranked 67 on the Drucker Institute's list of • Forbes • Newsweek • Ethisphere 2024 list for the 17th time • Newsweek • Named to listing • Named to • Named one of the top military friendly employers by military.com. Johnson Controls is an equal employment opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit Division: JCFS (Johnson Controls Federal Systems) #LI-MG3 #LI-Onsite