Environmental Health and Safety Supervisor

TTX · Slaton, TX

Full-timeEngineeringPosted New
Apply now →
Job description(tap to read)

Environmental Health & Safety Supervisor I – South Central Region This position is based at TTX's railcar repair facility in Slaton, TX. The successful candidate is expected to work onsite at the Slaton facility four (4) days per week and may work remotely one (1) day per week, subject to business needs. Supports approximately 14 railcar repair and operational facilities throughout the South Central Region. Candidates should expect 30-50% travel, including overnight travel, for facility visits, inspections, investigations, training, and compliance activities. Mileage and business travel expenses are reimbursed in accordance with company policy. Job Summary: • Carry out the day-to-day operations of EHS department and contribute to the application of effective Health, Safety and Environmental management by providing technical support. General Responsibilities (but not limited to): • Assist in compliance reviews, general risk assessments and other safety assessments to support Health, Safety and Environmental management. • Maintain relevant EHS logs and documentation. • Assist in compliance with applicable laws and regulations. • Prepare applicable EHS reports as necessary. • Provide assistance and advice on EHS issues to make recommendations to facility management. • Lead detailed incident investigations and Root Cause Analysis. • Promote incident prevention for the benefit of employees and visitors. • Assist in the development and presentation of relevant EHS training. • Observe EHS regulations, wear all required safety equipment, encourage safe working practices, correct obvious hazards immediately or report them to the proper personnel. • Ability to work with employees and achieve cultural change in the face of potential resistance. • Maintain positive and proactive relations with managers and employees, as well as our customers and regulatory agencies. • Perform other work-related tasks as required or assigned. • Comply with all TTX Company and EHS procedures and policies. Facility Specific Responsibilities (but not limited to): • Serve as the primary EHS resource for the Slaton, TX repair facility. • Provide EHS support to approximately 14 assigned facilities throughout the South Central Region. • Visit locations regularly to establish EHS presence and provide support. • Conduct daily and monthly EHS Meetings/Trainings and schedule as needed. • Support implementation and manage EHS Programs, Policies and Procedures. • Perform facility EHS Inspections. • Ability to evaluate PPE and ensure proper use and maintenance of PPE. • Have knowledge and enforce compliance of Regulatory requirements (i.e. OSHA, EPA, etc.), including company EHS policies and procedures. • Ability to oversee Hazardous Waste Storage area and ensure regulatory agency compliance i.e. labeling, containment, proper disposal, documentation, etc. • Perform Storm Water Discharge sampling and document events. • Assist in emergency response and provide first aid treatment. • Oversee Behavior Based / Observation Safety Programs. • Help develop Job Hazard Analysis (JHA). • Follow Fall Protection program, inspect all fall protection equipment and maintain inspection records. • Travel up to 50% to support assigned facilities for meetings, training, inspections, investigations and compliance activities. • Ability to oversee Safety Incentive Programs. • Assist in administering and maintaining compliance programs such as Hazard Communication, EAP, Hearing Conservation, Hot Work, Respiratory Protection, BBP, etc. • Perform additional duties as assigned by EHS Manager. Qualifications/Requirements: • Must possess a Bachelor's Degree in Occupational, Health & Safety Sciences (or related field), or a minimum of three years' experience in an Environmental, Health and Safety position in a heavy manufacturing industry environment; Technical writing a plus. • Excellent interpersonal and communication skills. • Willing to work different shifts and travel up to 50% of the time. Physical Job Requirements: (The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.) Due to inspections and product testing at customer facilities, the employee is frequently required to talk or hear, use hands to finger, handle, or feel, and reach with hands and arms. The employee is occasionally required to sit (remain stationary) and climb or balance. The employee is regularly required to move about (walk and stand). The employee must occasionally lift and/or transport up to 25 pounds. Correctable vision is required for close, distance, or depth perception capabilities, and the ability to adjust focus (the ability to adjust the eye to bring an object into sharp focus). The above job description is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or requirements.

## Regional Safety, Compliance, and Loss Prevention ManagerApplylocations: Remote - TXtime type: Full timeposted on: Posted Todayjob requisition id: JR102841Stord is The Consumer Experience Company, powering seamless checkout through delivery for today's leading brands. Stord is rapidly growing and is on track to double our revenue in the next 18 months. To meet and exceed this target, Stord is strategically scaling teams across the entire company, and seeking energetic experts to help us achieve our mission.By combining comprehensive commerce-enablement technology with high-volume fulfillment services, Stord provides brands a platform to compete with retail giants. Stord manages over $10 billion of commerce annually through its fulfillment, warehousing, transportation, and operator-built software suite including OMS, Pre- and Post-Purchase, and WMS platforms. Stord is leveling the playing field for all brands to deliver the best consumer experience at scale.With Stord, brands can increase cart conversion, improve unit economics, and drive sustained customer loyalty. Stord's end-to-end commerce solutions combine best-in-class omnichannel fulfillment and shipping with leading technology to ensure fast shipping, reliable delivery promises, easy access to more channels, and improved margins on every order.Hundreds of leading DTC and B2B companies like AG1, True Classic, Native, Seed Health, quip, goodr, Sundays for Dogs, and more trust Stord to deliver industry-leading consumer experiences on every order. Stord is headquartered in Atlanta with facilities across the United States, Canada, and Europe. Stord is backed by top-tier investors including Kleiner Perkins, Franklin Templeton, Founders Fund, Strike Capital, Baillie Gifford, and Salesforce Ventures.About the Role The Regional Manager, Health, Safety, Compliance & Loss Prevention is responsible for executing and continuously improving Stord's HSS program across a defined region of fulfillment and warehouse facilities. Reporting to the Head of Health, Safety, and Security, this role translates enterprise standards into daily operational reality — driving consistent performance across sites, building regional team capability, and owning outcomes. Regional Manager hires, develops, and directs a team of site-level safety and loss prevention professionals, holding them accountable to program standards while coaching them to grow. Success is measured by regional safety performance, loss prevention effectiveness, compliance posture, and the strength of the team built to sustain a culture.# \*\*This is a remote role, however must be based out of Dallas, TX with the ability to travel 40-50%.\*\*# # **What This Role Owns**Regional Managers are active partners in program design, governance, and policy-setting — contributing regional insight, operational context, and field intelligence to enterprise decisions led by the Head of HSS. They own translating those standards into consistent regional execution and are accountable for identifying, assessing, and mitigating risks that drive financial, operational, and asset loss across their region. The Regional Manager is accountable for:* Regional safety, compliance, and loss prevention performance metrics and trend improvement.* Translating enterprise standards into site-level execution — ensuring consistent, high-quality program delivery across every facility in the region.* Hiring, onboarding, and developing a regional team of HSS and loss prevention professionals.* Loss prevention strategy and shrink reduction for their region — including investigation oversight, security controls, and carrier/vendor accountability.* Regional compliance posture across OSHA, state regulations, and Stord internal standards.* Escalation management: serving as the regional decision-maker for incidents, investigations, and regulatory inquiries.* Risk ownership: proactively identifying, assessing, and mitigating risks across the region that could result in financial loss, operational disruption, or damage to people and assets — before they become incidents.# **Key Responsibilities**## Team Leadership and Development* Recruit, hire, and onboard site-level safety and loss prevention professionals within the region.* Set clear performance expectations, conduct regular coaching conversations, and deliver structured feedback and development plans.* Build a high-accountability, growth-oriented team culture within the regional HSS function.* Identify talent gaps and succession needs; develop internal candidates for expanded roles.* Facilitate regional team meetings, knowledge sharing, and collaborative problem-solving across sites.## Safety Program Execution* Deploy and sustain enterprise safety standards across all regional facilities, ensuring consistent implementation.* Conduct or oversee facility safety audits, gap assessments, and corrective action tracking.* Support site leaders and operations teams in embedding safety into daily standard work and leadership routines.* Lead or oversee incident investigations within the region, ensuring root cause analysis quality and timely corrective action closure.* Represent the region in enterprise safety forums, surfacing trends, risks, and improvement opportunities to the Head of HSS.* Coordinate peak readiness reviews to ensure safety standards are maintained through volume surges and labor onboarding.## Loss Prevention and Asset Protection* Own regional loss prevention strategy, including shrink reduction targets, security controls, and investigative outcomes.* Oversee internal investigations related to theft, fraud, and inventory discrepancy — escalating to HR, Legal, or Law Enforcement as appropriate.* Analyze loss trends across the region and drive root cause resolution through operational and procedural improvements.* Manage CCTV, access control, and physical security standards across regional sites, partnering with facilities teams on remediation.* Build relationships with carrier partners, vendors, and law enforcement contacts to support loss prevention outcomes.* Partner with Operations and Finance to quantify and report on shrink, damage, and loss impact at the regional level.## Compliance and Regulatory Management* Ensure all regional facilities maintain compliance with applicable OSHA, state, and local regulations.* Serve as the regional point of contact for regulatory inspections, responding to inquiries and coordinating any required corrective actions.* Monitor regulatory changes with regional applicability and coordinate with the Head of HSS to update procedures accordingly.* Oversee Hazmat compliance within the region, including proper storage, labeling, training, and incident reporting.* Support site-level readiness for customer-required certifications such as GMP, GDP, CTPAT, or TAPA where applicable within the region.## Metrics, Reporting, and Continuous Improvement* Own regional safety and loss prevention KPIs, delivering regular performance reporting to the Head of HSS and regional operations leadership.* Drive trend analysis across regional sites to identify systemic risks before they become incidents.* Manage corrective action pipelines within the region, ensuring timely closure and verified effectiveness.* Champion near-miss and hazard reporting culture across sites, tracking participation rates as a leading indicator.* Partner with Ops Excellence to integrate safety and loss prevention improvements into standard operating procedures.## New Site Launches and Network Changes* Lead HSS readiness for new site launches within the region, including safety walkthroughs, program onboarding, and staff training.* Support automation and equipment commissioning activities from a safety perspective within the region.* Ensure staffing and program coverage scales appropriately as the regional network grows.# **Required Qualifications**## Experience* 7+ years of experience in health and safety, loss prevention, or operations compliance.* 3+ years of direct people management experience, with a track record of hiring and developing high-performing teams.* Multi-site experience in 3PL, eCommerce fulfillment, distribution, or manufacturing environments.* Demonstrated experience in loss prevention investigation, shrink management, or asset protection in a high-volume logistics or retail environment.## Technical Knowledge* Working knowledge of OSHA standards, state-specific safety regulations, and compliance program management.* Hands-on experience managing physical security systems, including CCTV, access control, and inventory protection protocols.* Familiarity with incident investigation methodologies and corrective action systems.* Comfort with Hazmat regulations and controlled substance handling requirements in a warehouse or fulfillment context.* Experience using safety and loss prevention data to drive operational decisions.## Credentials (Preferred)* ASP, CSP, or equivalent safety certification, or active pursuit of one.* Wicklander-Zulawski (WZ), Reid Technique, or equivalent interviewing certification preferred.* Lean, Six Sigma, or continuous improvement background a plus.* Familiarity with CTPAT, TAPA, or SOC-related security requirements a plus.## Leadership Profile* A builder and developer of people — energized by growing a team, not just managing one.* Highly credible with frontline associates and site operations leaders; earns trust through presence and follow-through.* Capable of holding the line on standards while maintaining strong, collaborative relationships with operations partners.* Analytical and data-driven; able to translate metrics into clear narratives and actionable plans for regional and executive audiences.* Comfortable in ambiguity — able to triage competing priorities, escalate appropriately, and keep the team focused under pressure.* Strong written and verbal communicator; able to represent the region in enterprise forums and deliver clear guidance to site teams.**We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Stord participates in E-verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.**#J-18808-Ljbffr

NewRemoteFull-timeRetail
Apply →
Software Technology logo

Firewall OPS Engineer - Palo Alto

Software Technology · Slaton, TX

Job Title Experience supporting compliance programs, audits, assessments, cybersecurity initiatives, industrial controls, operations, engineering, or similar process-driven environments. Strong analytical, problem-solving, and organizational skills. Ability to communicate technical concepts effectively to both technical and non-technical stakeholders. Experience assessing risks, identifying vulnerabilities, and implementing corrective actions. Strong attention to detail and ability to systematically manage multiple priorities. Degree, diploma, technical certification, apprenticeship, or equivalent experience in Information Technology, Cybersecurity, Engineering, Instrumentation & Controls, Industrial Automation, Business, or a related discipline. Equivalent combinations of education and relevant experience will be considered.

Full-timeEngineering
Apply →
Crown Equipment logo

Field Service Technician

Crown Equipment · Slaton, TX

Field Service Technician Location: San Antonio, TX, US, 78219 Company Description: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Job Duties: • Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. • Perform all assigned planned maintenance on customer lift trucks. • Maintain a service van and its inventory. • Process paperwork after completion of each job. Minimum Qualifications: • Less than 2 years related experience • High school diploma or equivalent • Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications: • Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. • Good written/verbal communication and customer care skills. • Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. • Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. • Ability to read and understand service manuals, plan, and follow-through. Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. Crown also offers Service Technicians: Award-Winning Service Training Company Vehicle for Field Service Technicians Tool Insurance No Flat Rate 40 Hours Per Week plus Overtime Uniforms Specialty Tools Primarily 1st Shift Career Advancement Opportunities EOE Veterans/Disabilities

Full-timeManufacturing
Apply →

Field Application Engineer

Abb Holdings · Slaton, TX

Technical Lead At Consulting Engineer At ABB, we help industries run leaner and cleaner—and every person here makes that happen. You'll be empowered to lead, supported to grow, and proud of the impact we create together. Join us and help run what runs the world. This positionreports to Sales Support Manager. In this role, you will be the technical lead at consulting engineer, end user, EPC and design build customers, ensuring ABB products and solutions achieve a preferred/acceptable manufacturer status in project specifications. You will work closely with the local sales team and must be proficient in applying MV/LV switchgear, switchboards, panelboards, transformers and arc flash mitigation technologies. This support will extend to markets such as healthcare, data center, industrial, utility and commercial construction. The work model for this role is: Remote Key Responsibilities • Partner with consultants, end users, utilities, EPC/DBC firms, and engineering teams to develop and specify ABB low- and medium-voltage power distribution solutions, providing design support, product selection, value engineering, budgeting, and technical expertise throughout the project lifecycle. • Develop and review electrical system designs, one-line diagrams, schematics, layouts, equipment specifications, and budgetary estimates; serve as the subject matter expert for MV/LV switchgear, switchboards, panelboards, transformers, motor control, UPS, ATS, PSG, and power monitoring solutions. • Lead technical engagement and customer education initiatives by delivering presentations, Lunch & Learns, and industry thought leadership; mentor Field Application Engineers and provide advanced support on power system studies, including short-circuit, coordination, and arc flash mitigation analyses using SKM and EasyPower. • Drive business growth and strategic decision-making by evaluating project technical, financial, and risk considerations, championing assigned product lines, leveraging Salesforce (SFDC), and communicating customer insights, market trends, product opportunities, and competitive gaps to commercial and product management leadership. Qualifications • Bachelor's degree in engineering (preferably Electrical) with a minimum of 8 years of experience in Engineering (electrical distribution industry preferred) or a Master's degree in engineering with 4 years of experience in the same. • Knowledge of industry codes and standards; ANSI, IEEE, NEC, NEMA, NFPA 70E, UL preferred. • Strong interpersonal skills, able to consider multiple viewpoints and resolve technical issues. • Fluent in English (speaking and writing). • Must be willing to travel ~25% of the time but ability to visit customers in local area regularly. • Capability to establish and nurture partnership relationships with the regional engineering consulting community is required • Candidates must already have work authorization that would permit them to work for ABB in the US. Our Team Dynamics Our teams support each other, collaborate, and never stop learning. Everyone brings something unique, and together we push ideas forward to solve real problems. Being part of our team means your work matters - because the progress we make here creates real impact out there. What's in it for you We want you to bring your full self to work—your ideas, your energy, your ambition. You'll have the tools and freedom to grow your skills, shape your path, and take on challenges that matter. Here, your work creates impact you can see and feel, every day. ABB is an Equal Employment Opportunity and Affirmative Action employer for protected Veterans and Individuals with Disabilities at ABB. All qualified applicants will receive consideration for employment without regard to their- sex (gender identity, gender expression, sexual orientation), marital status, citizenship, age, race and ethnicity, inclusive of traits historically associated with race or ethnicity, including but not limited to hair texture and protective hairstyles, color, religious creed, national origin, pregnancy, physical or mental disability, genetic information, protected Veteran status, or any other characteristic protected by federal and state law. For more information regarding your (EEO) rights as an applicant, please visit the following websites: ABB Benefit Summary for eligible US employees [excludes ABB E-mobility, Athens union, Puerto Rico] Go to MyBenefitsABB.com and click on "Candidate/Guest" to learn more Health, Life & Disability • Choice between two medical plan options: A PPO plan called the Copay Plan OR a High Deductible Health Plan (with a Health Savings Account) called the High Deductible Plan. • Choice between two dental plan options: Core and Core Plus. • Vision benefit. • Company paid life insurance (2X base pay). • Company paid AD&D (1X base pay). • Voluntary life and AD&D – 100% employee paid up to maximums. • Short Term Disability – up to 26 weeks – Company paid. • Long Term Disability – 60% of pay – Company paid. Ability to "buy-up" to 66 2/3% of pay. • Supplemental benefits – 100% employee paid (Accident insurance, hospital indemnity, critical illness, pet insurance. • Paid Parental Leave. • Employee Assistance Program. • Health Advocate support resources for mental/behavioral health, general health navigation and virtual health, and infertility/adoption. • Employee discount program. Retirement • 401k Savings Plan with Company Contributions. • Employee Stock Acquisition Plan (ESAP). Time off ABB provides 11 paid holidays. Salaried exempt positions are provided vacation under a permissive time away policy. More about us ABB Electrification provides leading electrical distribution and management technologies, solutions and services to electrify the world in a safe, smart and sustainable way. The portfolio includes medium and low-voltage electrical components, switchgear, digital devices, enclosures, and circuit breakers, among others. With our products, solutions and services, we collaborate with customers to improve power delivery and security, enhance energy management, efficiency and operational reliability, as we seek to achieve a low carbon society. Join us. Be part of the team where progress happens, industries transform, and your work shapes the world. Run What Runs the World. #ABBCareers #RunwithABB #Runwhatrunstheworld Building a cleaner, smarter future takes all kinds of minds: the curious, the courageous, and the creative. That's why we welcome people from all backgrounds and experiences. Ready to make an impact? Apply today or visit to learn more about the impact of our solutions across the globe.

RemoteFull-timeEngineering
Apply →